VBOX 3iSL User's Guide download pdf (Page 33)

VBOX 3iSL User Guide

Page 33 of 53

11/04/2012

USB

A VBOX 3iSL includes an USB 2.0 connection that can be used for VBOX configuration and the output of real-time VBOX 3iSL serial data at the full 100Hz data rate.

Ensure that before you connect your VBOX 3iSL to your PC that you have installed the supplied VBOXTools software, as this will also put the required USB drivers

onto your PC.

The VBOXTools software installation will place the VBOX 3iSL USB drivers in the following location on your computer. C:\program files\Racelogic\Drivers

These drivers can also be found on the actual VBOXTools installation CD.

When you connect you powered up VBOX 3iSL to your PC with the supplied RLVBCAB066 USB A to USB mini lead your PC will recognise the presence of new

hardware and open the typical Windows install window for new hardware

 Follow the on screen prompts and point the Windows installation to the location of your drivers.

Note: USB drivers are available on the Racelogic website, also installed into C:\program files\Racelogic\Drivers after VBOX Tools installation.

Bluetooth

A VBOX 3iSL comes equipped with a Bluetooth Radio allowing configuration of the VBOX remotely along with remote output of real-time VBOX 3iSL serial data, at

the full 100Hz data rate, to any Bluetooth capable PC or Data logger.

Pairing your computer with the VBOX 3i

A VBOX3iSL will need the Bluetooth antenna connected and the computer will require a Bluetooth module or dongle to establish a virtual connection. VBOX3iSL will

connect to the computer via SPP (Serial Port Profile) this can be done as a secure or unsecure connection.

Note: Pairing code for secure connection is 1234

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 52 53

Comments to this Manuals

No comments

VBOX 3iSL User's Guide Page 33

Comments to this Manuals